Viewing Network Address Translations

If you want to see the IP Network Address Translations (NAT) mappings or translations on your Cisco device, you can use the show and debug commands. Some of the commands that give you information about the translations running on your Cisco device are summarized below.

Commands to Manage and View NAT Status

Command	Description
clear ip nat translation	Removes a dynamic NAT translation from the mapping or translation table
debug ip nat	Displays information about IP packets that are being translated by NAT
ip nat	Defines that data on the selected interface is subject to NAT translation rules
ip nat inside source	Configures NAT to use an inside destination address
ip nat outside source	Configures NAT to use an outside source address
ip nat pool	Configures pool of addresses to be used as outside source addresses
show ip nat translations	Shows a list of active NAT translations

dummies

Source:http://www.dummies.com/how-to/content/viewing-network-address-translations.html